FloorThane Electroshield ULC 5412

FloorThane Electroshield ULC 5412: Polyurethane based electrostatic conductive, three component self leveling floor coating



FloorThane Electroshield ULD 5412 based on polyurethane resin, is formulated as three component self leveling floor coating for electrostatic conduction.

FloorThane Electroshield ULD 5412 is a very low odor, three-component, chemical-resistant, urethane coating designed to develop electrostatic control properties. FloorThane Electroshield ULD 5412 produces a non-yellowing, thin-film, semi-gloss to satin finish and is available in a variety of colors and textures.

For More Info call us :-91-9323890195
Select Parameters


    • Extremely low, non offensive odor
    • Wide selection of colors available including near white and bright blues
    • Can be used on decorative flake and quartz floors as a transparent ESD top coat without addition of the color pack.
    • Variable Texture, skid resistance, and abrasion resistance can be achieved by addition  additives
    • Consistent resistance to ground without the need of a ground plane primer utilizing conductive particulates and polymers
    • BODY VOLTAGE GENERATION (BVG) below 15 volts with conductive footwear
    • Maintains ESD properties throughout the thickness of the applied coating and not dependent humidity for proper conductivity (unlike carbon fiber systems)
    • Superior impact and abrasion resistance
    • Seals concrete, protecting against dirt and spills
    • Resists staining and major chemical spills of cleaning and industrial chemicals

Specification Clause

    Flash Point

    ASTM D3278


    Volume Solids


    ASTM D2369


    Mixed Viscosity

    ASTM D2196

    300-500 cPs


    Dry Time


    ASTM D5895

    Tack Free 8 hr Dry 16-24 hr

    Full Cure 7-14


    VOC-Volatile Organic Compound

    ASTM D3960

    < 250 g/l 

Technical Data

    Abrasion Resistance Tabor CS-17, mg loss/1000 cycles/1000g mass



    ASTM D4060



    30 mg

    Coefficient if Friction- COF James Test

    ASTM D2047




    ASTM D2370





    ASTM D2794

    140 in.lbs Direct &


    Hardness (Pencil)

    ASTM D3363




Project Profile

    There is no project updated as present.


    For more details on technical details contact us.

Latest News